Never cut fret slots by hand again with the Proxxon FET

You can get a very thin kerf saw blade for cutting fret slots, like this one This cuts a shade over slots Other wise what about a

Never cut fret slots by hand again with the Proxxon FET thin strips of wood or plywood inserted into PORTER CABLE Unless a butt joint is connecting faces with faces cut spline slots in MAKING WOOD JOINTS 139

You can get a very thin kerf saw blade for cutting fret slots, like this one This cuts a shade over slots Other wise what about a

slot machine graphic design Cutting a 020 wide slot to the length and depth you want would be murder with an end mill A slitting saw is what you need Of coarse,

Use a router with a plunge base and either an edge guide or straight edge, depending on the size of your work piece

cutting a thin slot in wood I'm turning a Proxxon FET miniature table saw into a fret slot cutting saw Adding a very simple

I have up cut bits but they leave the top edge a bit ragged so I didn't use one It occurred to me during the operation that only the bottom